Acrylate Injection Grout

Acrylate Injection Grout is a high-elasticity gel formed from acrylate monomers as the main agent, with water as the carrier, under the action of initiators and accelerators (curing agents). It is free of toxic components, making it an environmentally friendly chemical grouting material for leak plugging and waterproofing. It has high viscosity, strong penetration ability, and the gel exhibits excellent impermeability, viscoelasticity, and aging resistance.

Three-component / OEM Accepted

APPLICATION RANGE

This product can be used for long-term water environment of cracks, deformation joints, construction joints seepage plugging, or sheet waterproof layer of seepage repair grouting and underground structure reconstruction of the waterproof layer grouting, it is very strong chemical corrosion resistance, can be used for special environment injection.

PACKAGING & COVERAGE

Specification:	20kg / pail
Appearance:	Three components: Component A (white liquid) + Component C (transparent liquid) + Component B (white powder). It transforms into a white gel after curing.
Shelf Life:	1 Year

TECHNICAL DATA

Item	Data
Tensile strength, MPa	0.9
Elongation at break, %	1000
Low temperature flexibility (-10℃)	No crack
Compressive strength of solids, MPa	0.7
Solid content, %	49
Initial setting time, s	49
Final setting time, s	50
Water expansion, %	45
Permeability, cm / s	8
Concentration, %	9
Solubility in water, %	100
pH	7.5
Boiling point, °C	90

ADVANTAGES

Strong penetration

Liquid viscosity is extremely low, the slurry can penetrate into the 0.01mm fine crevices, effectively deal with water seepage.

Good elongation

The gel has high elasticity, and the extension rate can reach 50%, which effectively solves the expansion and contraction problem of the structure.

Excellent seepage resistance

The permeability coefficient of the gel is small, and it is extremely difficult for water to pass through the gaps after grouting.

Large expansion rate

Under dry condition, it has excellent bonding performance with concrete surface, even if the gel is destroyed, the concrete interface is still intact.

CUSTOMIZATION SERVICE

Customization is available for product quality, packaging design, and package sizes.